Manufacturer: Cask Global Canning Solutions

• Cask Model ACS version 4.2 canning line
• 5 Heads/Filling arms
• Can/seam 25-35 CPM
• 12 oz. or 16 oz. standard cans
• Videojet 1220 date coder
• Pack Leader PL-501 can labeler
• Custom rotating can collection table (rotates so cans don’t accumulate)

Location: Hialeah, Florida

Stock number: 1056-1

Manufacturer: Wild Goose

• • Wild Goose WG5 Evolution Canning Line
  • CAN-STD: Standard Can Size 12oz / 16oz
  • CAN-Custom: Custom Can Size 250 mL
  • Flow meters- Option
  • IPTM: Pres & Temp Monitor
  • RT-STD: Standard Post Seam Rinse Tunnel for WG1-5
  • Wild Goose Canner Basic Spare Parts Kit
  • SKA-OLI Vibrator
  • SKA-Rinse Cage-Nimbus or Half Pint
  • SKA-Conveyance 4.5″x109″: stainless steel post-fill conveyor (includes VFD w/disconnect)
  • SKA-Date Inline Coding system accessory kit includes air blaster, guide rails, and bracketry
  • SKA-Markem Imaje 9450 Date Coder
  • SKA-Stainless Wheelbase & Casters
  • SKA-Crate-Half Pint, Nimbus or CIB (lower 48 States & Canada)
  • SKA-Crate-Post Fill (lower 48 States & Canada)
  • Wild Goose -Labeler: 120V, 60Hz Label Wind: #3 or #4 Label Direction: LH or RH
  • Wild Goose Labeler Sensor (Standard)
  • Wild Goose Labeler Casters (includes leveling feet and casters)
  • Wild Goose Labeler Spare Parts Kit

  Location: Portland, Oregon

  Stock Number 1038-1

Manufacturer: ABE Equipment

• ABE CraftCan 30 canner
• ABE LabelMax 90 labeler
• Sneed date coder
• Air dryer system
• ABE watch dog co2 monitor
• Pallets 16 oz. Blank cans with lids (6 Available)

Location: New York

Stock number: 1040-2

Manufacturer: Wild Goose

• • Wild Goose Gosling Spirit Canning System
  • Less than 2 years old
  • One filling Head
  • Use with 100 mL steel can, 187 mL, 200 mL, 250 mL aluminum cans
  • Up to 14 cans/minute
  • Tabletop system with adjustable leveling feet
  • 44 in L x 26 in W x 41-43 in H
  • 275 lbs. operating weight
  • Single-phase 13A @ 115VAC, 50/60 Hz or single-phase 200V-240V

  Location: Lake Stevens, Washington

  Stock Number 1020-1

Manufacturer: Wild Goose

• Up to 40 bottles a minute.
• Automatic counterpressure filling with 2, 4 or 6 fills heads
• Automatic crowning
• Semi-automatic rinsing
• Dimensions: 5.5′ L x 3.5″ W (1.7 m L x 1.1 m W)
• Power: Single-phase 17A @ 115VAC, 50/60 Hz  or  9A @ 230VAC, 50/60 Hz
• Air: Clean, dry compressed air required at 15 cfm @ 90 psi (25 m3/h @ 6.2 bar); refrigerated air dryer and coalescing air filter rated to 0.10-0.01 micron required
• CO2: Up to 12 cfm @ 40 psi

Location: Post Falls Idaho

See it in action:

Manufacturer: Krones
Year Manufactured: 1996
Condition: Like New
Power Requirement: Three Phase 208/240V
Features: 13,200 Bottles Per Minute

Major piece of bottling equipment for high volume brewery

Please Note: This bottling line equipment is located in Mexico.

Manufactured by Dixie Canner

Features:

• • Can seal up to 900 32 oz. crowlers/hour
  • Small 10″ x 7″ x39″ footprint
  • Seam containers under ambient atmospheric conditions.
  • Made of rust-resisting materials.
  • Tough, fast, and precise.
  • 110V Power. Direct Drive Motors are UL Listed and CE Certified
  • The equipment has been sold

Manufactured by: Cask Global Canning Solutions
Controls: Touchscreen HMI with 3-Head Fill Station
Power: Single Phase, 208 – 240VAC at 15A, 50/60Hz
CO2: 25 psi from plant system connected to system
Air: 3 cfm dry air at 90 psi. Compressor c/w refrigerated dryer and auto float drain
Water: 1/2″ hot water line (Clean in Place CIP)
Beer: Temperature 32-35.6F
Carbonation: 2.4 to 2.9 volumes CO2
Dimensions: 2’x5′ = 10 sq.ft.
Beverage Throughput: 2.5BBL/Hr, 78 gal/hr

Compact and mobile. Easy to use.
15 cans per minute. 37 cases per hour.

This equipment has been sold

Thank you for your interest in used equipment from Used-Brewing-Equipment.com. We are a business unit of Portland Kettle Works (portlandkettleworks.com and portlandkettleworks.mx) one of the world’s leading U.S. based manufacturers of high quality stainless steel equipment for craft brewers, wineries, kombucha brewers, cold brew coffee brewers and other beverages. From startup to expansion to shutdown, Portland Kettle Works is here to support your beverage brewing operations.

Click here for more information and one of our equipment specialists will contact you shortly to discuss your brewing equipment requirements.

All equipment descriptions subject to change without notice.

All equipment subject to prior sale.

Any equipment physically located away from The Portland Kettle Works headquarters in Portland, Oregon 97210 USA subject to packing and drayage charges at the sole risk and expense of the buyer.